Advantages: low noise, no need for water, no dust pollution, power saving, labor saving, no waste, more than 95% of metals and non-metals can be recycled. In order to prevent dust pollution in the process of work, we use a two-in-one dust removal device: cyclone dust collector and pulse dust collector. Effectively solved the problem of dust pollution, and all the indicators reached the national standard.

Step 1: Disassemble the electronic components
Usually, the first step in board recycling is to separate the electronic components from the board using a board dismantling machine. The bare circuit motherboard is then obtained, which is further processed to obtain copper powder and resin powder.

Step 2: The circuit board is crushed and broken
The circuit board shredder was the first machine to reduce the size of the circuit board. Its feed port needs to be large enough to handle tons of circuit boards simultaneously. During the shearing and crushing of the two rotors, the circuit board was broken into irregular pieces. For the first shredder, we chose a two-axis shredder. The particles after the circuit board is broken are about 60 mm x 60 mm. Next, the second crusher is the granulator, and the particles after granulation are 20 mm. The scraps are then collected in cages for further processing.

Step 3: Separate metal and non-metal powder
The shredded printed circuit boards will be separated by air separators and electrostatic separators. Our circuit board recycling machines use dry physical crushing, separation and dust removal methods that do not pollute the environment. High voltage electrostatic separation combined with air separation process can purify about 99% of the metal powder.

argument
Capacity: 500-800 kg/hour
Dimensions (length * width * height) : 25m * 5m * 6m
Power: 94.51KW (without electronic component disassembly wire)
Voltage three-phase power supply 440V/50HZ, 200KVA or customized.
Iron recovery (weight) : ≥ 99
Copper recovery (weight) : ≥ 97
Epoxy resin recovery (weight) : ≥ 97
Noise, dust leakage and exhaust emissions meet the relevant national standards and requirements.
Equipment appearance and color: manufacturer's standard. (Customizable)

Printed circuit board scrap background |pcb recycling

The main components of the circuit board (PCB) are the substrate and electronic components, the main components are metal, oxide, organic matter, glass fiber, epoxy resin and other non-metallic components. At present, it basically does not contain environmentally sensitive substances, and has certain recycling value.

The metal grade in the circuit board (PCB) is equivalent to tens to hundreds of times that of ordinary minerals. The metal content is more than 40%, mainly copper. In addition, there are metals such as gold, tin, nickel, lead, and silicon, including rare metals, while the content of mineral-rich metals in nature is usually only 3-5%. In addition, non-metallic slag of waste circuit boards (PCBS) can be used as building materials. At the same time, the solder and plastic on the waste circuit board are also important resources that can be recycled. Therefore, the establishment of more and more circuit board (PCB) recycling plants provides a final destination for a large number of waste circuit boards, and can also better protect the environment and their own health.